161 tools for universal use in ABS thermoformed trays :

• combination wrenches 6÷21 mm
• combination wrenches 22 - 24 - 27 - 30 - 32 mm
• pin punches Ø 2 - 3 - 4 - 5 - 6 mm
• centre punch Ø 4 mm
• double open end wrenches 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17
  18x19 - 20x22 - 21x23 - 24x26 - 27x29 - 30x32 mm
• offset hexagon key wrenches 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm
• double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm
• offset hexagon key wrenches 2-2,5-3-4-5-6 mm
• drivers for Torx® head screws, with handles T10-T15-T20-T25-T27-T30
• 1/2" square drive hexagon sockets 10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-30-32 mm
• 1/2" drive, socket drivers for hexagon screws 5-6-8-10-12 mm
• 1/2” wobble extension bar 125 mm
• 1/2” wobble extension bar 250 mm
• 1/2" drive universal joint
• 1/2" drive sliding T-handle 305 mm
• 1/2" drive reversible ratchet 
• 1/4" hexagon sockets 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm
• 1/4" socket drivers for hexagon screws 2,5-3-4-5-6-8 mm
• 1/4” drive extension bar 50 mm
• 1/4” drive extension bar 150 mm
• 1/4" drive universal joint
• 1/4" drive spinner handle
• 1/4" drive swivel T-handle 115 mm
• 1/4" reversible ratchet
• Heavy-duty diagonal cutting nippers 160 mm
• half-round needle nose pliers 180 mm
• Extra-long needle nose pliers 160 mm
• circlip pliers straight, internal 180 mm
• circlip pliers bent, internal 170 mm
• circlip pliers straight, external 175 mm
• circlip pliers bent, external 175 mm
• Slip joint pliers boxed joints 250 mm
• self - locking pliers 240 mm
• screwdrivers for cross head Phillips® screws 2,5x50-3x75-3,5x100-4x125-5,5x100-5,5x150-6,5x150 mm
• screwdrivers for cross head Phillips® screws 8x150-8x200-10x200 mm
• screwdriver for slotted head screws, extra-short series 4x30-6,5x30 mm
• screwdrivers for cross head Phillips® screws PH0x60-PH0x100-PH1x80-PH1x120-PH2x100-PH2x150 mm
• screwdrivers for cross head Phillips® screws PH3x150-PH4x200 mm
• screwdriver for cross head Phillips® screws, extra-short series PH1x30-PH2x30 mm
• flat chisels, ribbed type 100-200 mm
• engineer’s hammer 300 g
• soft face hammer Ø 35 mm
• second-cut square files 200 mm
• second-cut triangular files 200 mm
• second-cut flat files 200 mm
• second-cut half-round files 200 mm
• second-cut round files 200 mm